Kingston HyperX KHX6400D2LLK2/4G ikisini birden takınca donanım hatası veriyor. Yrd..

[akkaradeni]

Kingston HyperX KHX6400D2LLK2/4G marka ramlarim var fakat bu 2 kitten oluşan ramlari anakarta aynı anda takıp kullanmaya çalışınca windows açılırken mavi ekran çıkıyor ve donanım hatasıyla ilgili sorun veriyor. Bu ramlari tek olarak takınca ise herhangi bir sorun yok. Anakartın üzerinde 2 farklı renkte 4 adet ram girişi var. Ramleri hertürlü şekilde takıp denedim fakat ikisi birlikte takılı olunca hata veriyor. Anakartım bu ramlari desteklemesine rağmen neden böyle bir sorun yaşıyorum anlayamadım. Kingston un sitesinden yaptığım araştırmaya göre de ramler anakartımı destekliyor. Üstadlar yardımınızı bekliyorum. Sistem, Anakart ve Ramlerin özellikleri aşağıdadır;

Operating System: Windows Vista™ Ultimate (6.0, Build 6000) (6000.vista_rtm.061101-2205) (64 bit), (Ayrıca 32 bit de kurup denedim, aynı sorun var.)
Language: Turkish (Regional Setting: Turkish)
System Manufacturer: MSI
System Model: MS-7250
BIOS: Default System BIOS
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 CPUs), ~3.0GHz
Display Card name: NVIDIA GeForce 8800 GT

------------------------------------------------------------------------------------------------

Anakart (Specifications)

CPU

• AMD® Athlon 64 X2, Athlon 64, Athlon FX and Sempron in the Socket AM2 package.
Please refer to CPU Support for compatible CPU; the above description is for reference only.

FSB

• HyperTransport 1.0/2.0 supporting speed up to 1GHz (2000MT/s)

Chipset

• NVIDIA® nForce 570 Ultra MCP Chipset

Main Memory

• Supports Dual DDR II 533/667/800
- 4 DDRII DIMMs (240pin / 1.8V)
- Supports a maximum memory size up to 8GB.


Slots

• 1 PCI Express x16 slot
• 3 PCI Express x1 slots
• 3 PCI slots, support 3.3V/ 5V PCI bus Interface, includes one orange slot which supports 2 master for MSI special PCI function card (ex. wireless LAN and bluetooth combo card.).

On-Board IDE

• One IDE port by NVIDIA® nForce 570
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
- Can connect up to two IDE devices

On-Board SATA

• 6 SATA II ports by NVIDIA® nForce 570
- Supports storage and data transfers at up to 3Gb/s

RAID Function

- SATA II 1~6 supports RAID 0/ 1/ 0+1 or RAID 5 mode by NVIDIA® nForce 570

MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

Audio

• Chipset integrated by Realtek® ALC883
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec

LAN

• Dual LAN jacks
- Supports Dual LAN 10/100/1000 Fast Ethernet by Vitesse VSC8601

Internal I/O Connectors

- ATX 24-pin power connector
- ATX 4-pin 12V CPU power connector
- ATX 4-pin VGA power connector
- CPU / System / NB FAN connectors
- CD-in connector
- Clear CMOS button
- IrDA infrared module header
- Chassis intrusion switch connector
- Front panel audio connector
- Front panel connector
- D-Bracket2 connector
- 3 x USB 2.0 connector support additional 6 ports
- 1 x Floppy disk drive connector
- 6 x Serial ATA II connectors
- 1 x ATA133 HD connectors

MSI Reminds You...
• The floppy disk cable will be optional.

Back Panel I/O Ports

- 1 x Parallel port
- 1 x Serial port (COM 1)
- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 1 x Coaxial SPDIF out
- 1 x 6 in 1 audio jack (S/SPDIF out)
- 4 x USB 2.0 ports
- 2 x RJ45 LAN jack

Dimension

• 30.5cm(L) x 24.5cm(W) ATX Form Factor

Mounting

• 9 mounting holes.

Web Adres: http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&cat2_no=&cat3_no=&prod_no=253

-------------------------------------------------------------------------------------------------

KHX6400D2LLK2/4G
4GB (2GB 256M x 64-Bit x 2 pcs.)
PC2-6400 CL4 240-Pin DIMM Kit

DESCRIPTION:

Kingston's KHX6400D2LLK2/4G is a kit of two low-latency 256M x 64-bit 2GB (2048MB) DDR2-
800 CL4 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR2
FBGA components per module. Total kit capacity is 4GB (4096MB). Each module pair has been
tested to run at DDR2 800MHz at low latency timing of 4-4-4-12 at 1.95V. The SPD is programmed
to JEDEC standard latency 667Mhz timing of 5-5-5-15 at 1.8V. Each 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows:

FEATURES:

Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs (CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 3, 4, 5 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 667MHz 5-5-5-15 at +1.8V / 800MHz 4-4-4-12 at +1.95V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), double sided component

PERFORMANCE:

Clock Cycle Time (tCK) CL=5 3ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 54ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 127.5ns
Row Active Time (tRAS) 39ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 2.592 W (operating per module)
UL Rating 94 V - 0
Operating Temperature 0o C to 55o C
Storage Temperature -55o C to +125o C

Web Adres: http://www.ec.kingston.com/ecom/hyperx_us/modelsinfo.asp?SysID=29393