eccen
New member
Link>>>>>ETABS Version 9.2.0
38.8 MB
ETABS Version 9.2.0 is now shipping and is available as a full installation or as a patch to existing installations. It includes the following significant enhancements:
V9.2.0
• A printed report is now available for steel and concrete frame design. This report is produced in RTF format for Microsoft Word, and contains a cover page, tables of design input values, tables of design results, and an individual design summary sheet for each selected member.
• Concrete frame design output for enveloping results has been improved to include, in a single sheet, the controlling forces/moment, stations, and load combinations, as well as the resulting rebar and/or demand/capacity ratios. This is available by right-clicking on the member for design results, or as part of the new printed design report.
• The documentation available using the Help > Documentation command can now be modified by the user. This allows you to add company standards and procedures, project data, language translations, and other documents in a single location for ease of reference.
• The “Automated Lateral Loads Manual” has been added which describes all the code-based seismic and wind loads available in ETABS and SAP2000.
V9.1.7
• Concrete frame design was added for the Eurocode 2-2004 design code, including the CEN generic version and the United Kingdom National Annex. Seismic provisions to EC8 are under development.
V9.1.6
• Steel frame design check was added for the CAN/CSA-S16-01 design code, including seismic provisions.
• Concrete frame design check was added for the CAN/CSA A23.3-04 design code.
• Steel frame design check was added for the AISC 360-05 and IBC 2006 design code, including the seismic provisions of AISC 314-05. The direct analysis method has been implemented, including second-order P-delta effects and tau-b fixed or variable. Automatic iteration for optimal member selection includes the effect of tau-b variable.
• New automated lateral loads were added, including:
• NBCC 2005 wind loads, seismic loads, and response-spectrum functions
• IBC 2006 seismic loads and response-spectrum functions
• ASCE 7-05 wind loads
• Automated notional loads were added for the AISC 2005 design code.
• Significant enhancements were made to the link between ETABS and Autodesk Revit Structural 2008.
• Several new manuals were added:
• Concrete shear wall design for the ACI 318-02 and ACI 318-05 design codes.
• Combined all older steel frame design codes into a single comprehensive manual
• Combined all older concrete frame design codes into a single comprehensive manual
V9.1.5
• Updated the link ETABS and Autodesk Revit Structural to version 2008.
38.8 MB
ETABS Version 9.2.0 is now shipping and is available as a full installation or as a patch to existing installations. It includes the following significant enhancements:
V9.2.0
• A printed report is now available for steel and concrete frame design. This report is produced in RTF format for Microsoft Word, and contains a cover page, tables of design input values, tables of design results, and an individual design summary sheet for each selected member.
• Concrete frame design output for enveloping results has been improved to include, in a single sheet, the controlling forces/moment, stations, and load combinations, as well as the resulting rebar and/or demand/capacity ratios. This is available by right-clicking on the member for design results, or as part of the new printed design report.
• The documentation available using the Help > Documentation command can now be modified by the user. This allows you to add company standards and procedures, project data, language translations, and other documents in a single location for ease of reference.
• The “Automated Lateral Loads Manual” has been added which describes all the code-based seismic and wind loads available in ETABS and SAP2000.
V9.1.7
• Concrete frame design was added for the Eurocode 2-2004 design code, including the CEN generic version and the United Kingdom National Annex. Seismic provisions to EC8 are under development.
V9.1.6
• Steel frame design check was added for the CAN/CSA-S16-01 design code, including seismic provisions.
• Concrete frame design check was added for the CAN/CSA A23.3-04 design code.
• Steel frame design check was added for the AISC 360-05 and IBC 2006 design code, including the seismic provisions of AISC 314-05. The direct analysis method has been implemented, including second-order P-delta effects and tau-b fixed or variable. Automatic iteration for optimal member selection includes the effect of tau-b variable.
• New automated lateral loads were added, including:
• NBCC 2005 wind loads, seismic loads, and response-spectrum functions
• IBC 2006 seismic loads and response-spectrum functions
• ASCE 7-05 wind loads
• Automated notional loads were added for the AISC 2005 design code.
• Significant enhancements were made to the link between ETABS and Autodesk Revit Structural 2008.
• Several new manuals were added:
• Concrete shear wall design for the ACI 318-02 and ACI 318-05 design codes.
• Combined all older steel frame design codes into a single comprehensive manual
• Combined all older concrete frame design codes into a single comprehensive manual
V9.1.5
• Updated the link ETABS and Autodesk Revit Structural to version 2008.
